A Peerless PUREFIRE condensing boiler with a lockout needs a different diagnosis from a Series 63/64 steam model with cold radiators. Identify the series and symptoms so a qualified professional can check the correct controls and piping.
General inquiries: 7 AM–7 PM · Emergency calls: 24/7. Service availability must be confirmed.
Enter your ZIP code or city, or call to ask about available service options.
Search results do not guarantee coverage or an appointment.
Peerless makes both steam boilers and hot-water systems. PUREFIRE electronic error states and traditional steam water-level or venting problems should not be treated as interchangeable.
A gas odor or carbon monoxide alarm requires leaving the premises and calling for emergency help from a safe location. Do not bypass a low-water cutoff or repeatedly reset an unexplained burner lockout.
Start with the exact series and whether the heat comes through steam or hot water.
For PUREFIRE note the full error, including whether the display identifies a blocking or locking condition; on steam units report gauge-glass level changes only if clearly visible from outside.
A technician can investigate combustion and flow on PUREFIRE equipment, or low-water, pressure controls and steam distribution on a Series 63/64 setup.
A vent, sensor or zone issue is distinct from cracked cast iron or an internal exchanger problem. Confirm parts compatibility and cost before proceeding.
Call (888) 766-1474 for an inquiry. Exact model support, scheduling and service availability must be confirmed for your area.
Give the Peerless series and whether you have steam or water radiators.
Describe a PUREFIRE code, rising/lowering water level, leak or cold zone.
Share your ZIP to check repair availability.
Discuss diagnostic charges, matching manuals and parts before approving repair.
Cast-iron tradition with a condensing branch — the PUREFIRE.
The WBV/WV series are cast-iron gas/oil boilers in the classic American pattern: long-lived blocks, with faults concentrated on the burner and controls as they age. The EC/ECT lines continue that tradition. The PUREFIRE is the condensing entry — where the fault map becomes condensate management, ignition/flame sensing, and flow, like any mod-con.
On the cast-iron lines, age is the diagnostic context: a 30-year-old block with a burner fault is a service call; the same block with section weeping is a replacement conversation.
Where to look first.
Model-specific questions to discuss before authorizing a repair.
PUREFIRE technical literature distinguishes blocking (often marked with an E code on some versions) from locking conditions (A codes in documented versions). Use the manual for your specific model; do not infer that every PUREFIRE generation behaves identically.
No. Repeated lockouts indicate a problem that requires diagnosis. A reset should not be used to bypass recurring combustion or safety issues.
Air vents, steam distribution, condensate return and water-level or pressure behavior can influence radiator heat. A technician should first determine whether the whole system or selected radiators are affected.
Water at a vent may result from wet steam, drainage or vent issues; it is not safe to assume the vent itself is the only fault. Avoid touching live steam fittings.
Yes. On hot-water models, pumps and zones can fail to distribute heat; on steam models, trapped air or return trouble can cause a different symptom.
An error-code investigation, steam piping assessment or leaking casting inspection involves different labor and parts. Ask for itemized work and assessment fees.
A confirmed boiler-section leak, major unsafe deterioration, or uneconomical repair can justify replacement. A control, vent or circulator fault may be much less extensive.
Share PUREFIRE, Series 63/64 or MI-e if known, any exact displayed code, steam versus hot-water setup and affected rooms, plus ZIP.
Small weeps sometimes stabilize, but section leaks do not heal — they grow, and the makeup water they demand corrodes the rest of the system. Get the leak location assessed: a single accessible section on a younger block can be worth replacing; on a 30-year-old block the money usually belongs in a new boiler.
Yes. The cast-iron lines want burner service and safety checks; the PUREFIRE wants condensate-trap attention, combustion verification, and water-quality awareness like any condensing boiler. Tell us which you have on the call — the triage questions differ.
If the fault is in another part of the heating system, these services may help narrow the next step.
Steam radiator, water-level and pressure-control issues.
View Steam Boiler Repair →
Condensate, ignition and high-efficiency boiler concerns.
View Condensing Boiler Repair →
Water loss, leaks, relief valves and expansion systems.
View Boiler Leak & Pressure Repair →
Radiator zones, circulators and hydronic distribution.
View Hot-Water & Hydronic Boiler Repair →PUREFIRE fault-code designations and corrective steps vary by manual edition. Peerless provides the appropriate documentation; professional diagnosis should follow the exact product literature.
Peerless Boilers technical document library ↗
Boiler Repair Pro is not an authorized or certified Peerless service provider. References are supplied to help identify the correct product; brand names belong to their owners.
Call with your Peerless series, exact PUREFIRE message or steam-system symptoms, and your ZIP code. Ask about suitable repair assessments and costs.
Call (888) 766-1474General inquiries: 7 AM–7 PM · Emergency calls: 24/7. Local service availability must be confirmed.
